| |
TM 9-2320-364-20-4
2-3095
+
+
86
85
30
87
(1) Connect positive (+) multimeter lead to
relay R36 terminal 30.
(2) Connect negative () multimeter lead to
a known good ground.
(a) If 22 to 28 vdc are not present,
repair wire 1789 (see schematic
Fig 2-75) or notify DS
Maintenance.
(b) If 22 to 28 vdc are present, go to
Step 16 of this Fault.
VOLTAGE TEST
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
WIRE
1789
TERMINAL 30
RELAY
R36
|