|
| |
TM 9-2320-364-20-4
2-3168
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
NO
3.
Is continuity present between
CHU wire harness connector
MC185, terminals D and E?
WARNING
Read WARNING
on Page 2-3169
Replace CHU wire
harness (Para 21-20).
Verify repair, go to
Step 6 of this Fault.
If continuity is not present, CHU
wire harness is faulty.
YES
CHU jumper wire harness OK.
Mode switch properly
adjusted.
Mode switch OK.
Continuity test.
CHU wire harness faulty.
CHU control box faulty.
Wire 1495 faulty.
4. CHU MODE SWITCH INOPERATIVE (LIFTING FRAME
CONTACTS REAR ROLLERS) (CONT).
|
