|
| |
TM 9-2320-364-20-4
2-3197
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may
result. Damage to equipment, injury or death
to personnel may occur.
VOLTAGE TEST
(1) Disconnect harness connector MC188
from proximity switch connector.
(2) Set multimeter select switch to volts.
(3) Is there voltage measured at connector
MC188 terminal B?
(a) If there is no voltage, go to Step 12
of this Fault .
(b) If there is voltage, go to Step 17
of this Fault.
PROXIMITY
SWITCH
CONNECTOR
CONNECTOR
MC188
A
B
C
B
|
