|
| |
TM 9-2320-364-20-4
2-3202
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
NO
14.
WARNING
Read WARNING
on Page 2-3203
Continuity test.
If continuity is not present, wire
1472 is faulty.
YES
Is continuity present between
wire 1472 at connector
MC82A, terminal F and relay
R50, terminal 86?
5. HOOK ARM EXTENDS TOO FAR IN CHU MODE (AUTO) (CONT).
Fault not corrected.
Notify DS
Maintenance.
CHU jumper wire harness OK.
LHS operates in MAN HA
position.
LHS operates in MAN MF
position.
Proximity switch properly
adjusted.
Proximity switch is OK.
Wire 1474 of wire harness OK.
Wire 1474 OK.
Wire 1472 is faulty.
Wire 1435 of wire harness is
faulty.
Wire 1435 is faulty.
Repair wire 1472
(see schematic
Fig 2-79) or notify DS
Maintenance. Verify
repair, go to Step 17 of
this Fault.
|
