| |
TM 9-2320-364-20-4
3-17
b.
Installation.
(1)
Lubricate preformed packing (2) with clean
engine oil and install preformed packing on
engine oil filter (1).
(2)
Fill engine oil filter (1) 2/3 full with clean
engine oil.
(3)
Install engine oil filter (1) on filter head (3).
Do not use oil filter removal tool
to tighten engine oil filter or
possible damage to filter head
may result.
(4)
By hand, tighten engine oil filter (1) until
preformed packing (2) makes contact with
filter head (3).
(5)
By hand, tighten engine oil filter (1) 2/3 turn
on filter head (3).
c.
Follow-On Maintenance:
Start and run engine for three minutes, (TM 9-2320-364-10).
Check for oil leaks, (TM 9-2320-364-10).
Shut OFF engine and allow oil to drain for 20 minutes, (TM 9-2320-364-10).
Check oil level and add engine oil as needed, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|