|
| |
TM 9-2320-364-20-4
4-4
4-2. FUEL PRIMING PUMP REPLACEMENT (CONT).
NOTE
Note location and position of
elbows and tees prior to
removal.
(5)
Remove two locknuts (8), screws (9) and
priming pump (10) from bracket (11).
Discard locknuts.
(6)
Remove elbows (5) and (7) from priming
pump (10).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Ensure tees and elbow are
installed as noted prior to
removal.
(1)
Apply sealing compound to threads of
elbows (5) and (7).
(2)
Install elbows (5) and (7) in priming
pump (10).
(3)
Install priming pump (10) on bracket (11)
with two screws (9) and locknuts (8).
|
