|
| |
TM 9-2320-364-20-4
4-34
4-8. MAIN FUEL TANK AND BRACKETS REPLACEMENT (CONT).
(20)
Remove two locknuts (26), washers (27) and
position two fuel tank straps (28) up and out of
the way. Discard locknuts.
(21)
With the aid of an assistant, remove main fuel
tank (3) from fuel tank brackets (12). Lower
main fuel tank to ground.
(22)
Remove two nuts (29) and fuel tank
straps (28) from brackets (30).
NOTE
Perform Step (23) if strap liners
are damaged.
(23)
Remove strap liners (31) from each fuel
tank strap (28).
(24)
Remove two locknuts (32), screws (33) and
clamps (34) from brackets (30). Discard
locknuts.
(25)
Remove 12 locknuts (35), screws (36), two
fuel tank brackets (12) and two
brackets (30) from frame (37). Discard
locknuts.
NOTE
Perform Step (26) if rubber
adhesive tape is damaged.
(26)
Remove rubber adhesive tape (38) from
each fuel tank bracket (19). Discard rubber
adhesive tape.
(27)
Remove stop nut (39), two washers (40),
screw (41) and cap and chain (1) from
strainer (2). Discard stop nut.
(28)
Remove gasket (42) from cap and chain (1).
|
