|
| |
TM 9-2320-364-20-4
4-38
4-8. MAIN FUEL TANK AND BRACKETS REPLACEMENT (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
Do not coat last two threads of
fittings with sealing compound.
Sealing compound will
contaminate fuel system and
cause damage to equipment.
NOTE
Install elbows, reducers, tees and
check valve as noted prior to
removal.
(13)
Coat threads of tee (25), reducer (24),
reducer (22) and elbow (20) with sealing
compound.
NOTE
Install check valve with the word
“TOP” positioned on top.
(14)
Install tee (25), reducer (24), check
valve (23), reducer (22) and elbow (20) on
main fuel tank (3).
(15)
Coat threads of elbow (16) and tank vent
valve (18) with sealing compound.
(16)
Install elbow (16) and tank vent valve (18)
on main fuel tank (3).
(17)
Connect hose 2259 (21) to reducer (22).
(18)
Connect hose 2919 (19) to elbow (20).
(19)
Connect overflow hose (17) to tank vent
valve (18).
(20)
Connect hose 2260 (15) to elbow (16).
|
