|
| |
TM 9-2320-364-20-4
4-54
4-9. AUXILIARY FUEL TANK AND BRACKETS REPLACEMENT (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
NOTE
Perform Steps (9) and (10) if rubber liners were removed.
(9)
Apply spray adhesive to fuel tank brackets (30) and (41) and middle fuel tank bracket (40).
(10)
Install rubber liners (44) by removing protective backing and installing on middle fuel tank bracket (40)
and fuel tank brackets (30) and (41).
(11)
Install fuel tank bracket (41) with six screws (46) and locknuts (45) on rear mounting bracket (48). Tighten
locknuts to 210 lb-ft (285 N.m).
(12)
Install fuel tank bracket (30) with six screws (46) and locknuts (45) on front mounting bracket (47).
Tighten locknuts to 210 lb-ft (285 N.m).
47
48
40
41
30
44
46
45
45
46
44
44
|
