|
| |
TM 9-2320-364-20-4
5-2
Materials/Parts
Clamp (Item 18, Appendix F)
Clamp (Item 12, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Crane extended, (TM 9-2320-364-10)
Spare tire removed, (TM 9-2320-364-10)
Right side noise panel removed, (Para 17-26)
Engine cover opened, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Apendix G)
Socket Set, 3/8 in. (Item 62, Appendix G)
Wrench, Torque (0 to 175 lb-ft [0 to 237 N.m])
(Item 95, appendix G)
Wrench, Torque (0 to 60 N.m)
(Item 98, Appendix G)
Lifting Device (Minimum capacity 300 lbs
[136 kg])
Wooden Blocks (Appendix D)
5-2. MUFFLER REPLACEMENT.
Materials/Parts - Continued
Locknut (4) (Item 92, Appendix F)
Locknut (2) (Item 98, Appendix F)
Lockwasher (Item 173, Appendix F)
Screw, Self-Locking (5) (Item 319, Appendix F)
Allow engine to cool before performing maintenance on the muffler, exhaust pipe, exhaust
manifold or turbocharger. If necessary, use insultated pads and gloves.
NOTE
Note position of clamps to aid in installation.
(1)
Loosen clamp (1) and remove aspirator hose (2) from exhaust stack (3).
|
