|
| |
TM 9-2320-364-20-4
5-4
5-2. MUFFLER REPLACEMENT (CONT).
(7)
Remove two locknuts (15) and screws (16)
from clamp (17). Discard clamp, locknuts
and screws.
(8)
Remove two locknuts (18) and U-bolt clamp
(19) from exhaust tube (20). Discard
locknuts and U-bolt clamp.
(9)
Remove exhaust tube (20) from exhaust
tube (21).
(10)
Remove exhaust tube (20) from muffler (8).
NOTE
If truck is not equipped with a
crane, perform Steps (10) through
(13).
(11)
Remove two locknuts (22) and screws (23)
from muffler guard (24). Discard locknuts.
(12)
Remove two self-locking screws (25),
washers (26) and muffler guard (24) from muffler
guard (27). Discard self-locking
screws.
(13)
Remove two locknuts (28), screws (29) and
angle brackets (30) from muffler
guard (24). Discard locknuts.
|
