|
| |
TM 9-2320-364-20-4
5-13/(5-14 blank)
Ensure that exhaust pipes do not
contact parts of engine or truck
after assembly. Failure to
comply may result in damage to
equipment.
(8)
Position exhaust pipe (8) in exhaust
pipe (9).
(9)
Position clamp (6) on exhaust pipe (9).
(10)
Install clamp (6) on support bracket (7) with
locknuts (5). Tighten clamp to 35 lb-ft (47 N.
(11)
Tighten clamp (10) on exhaust pipe (3) to 35
lb-ft (47 N.m).
NOTE
It may be necessary to tap clamp
into place to ensure proper
seating of exhaust pipe and
turbocharger.
(12)
Tighten exhaust clamp (2) on exhaust
pipe (3) to 100 to 125 lb-in (11 to 14 N.m).
c.
Follow-On Maintenance:
Start engine, (TM 9-2320-364-10).
Check for exhaust leaks, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Close engine cover, (TM 9-2320-364-10).
Install right side noise panel, (Para 17-26).
Install spare tire, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
