|
| |
TM 9-2320-364-20-4
6-21
NOTE
A clamp may be used to hold drain hose on drain cock as shown in Step (3).
(3)
Install drain hose (3) and clamp (4) to drain cock (5).
(4)
Position end of drain hose (3) in drain pan.
NOTE
Cooling system capacity is 100 qts (95 liters).
Cooling system capacity with arctic kit is 103 qts (97 liters).
(5)
Open valve (6) on drain cock (5) and drain coolant.
(6)
After coolant stops draining, close valve (6) on drain cock (5).
(7)
Remove clamp (4) and drain hose (3) from drain cock (5).
(8)
Position drain pan under drain cock (7).
(9)
Open drain cock (7) and allow coolant to drain.
(10)
Close drain cock (7).
(11)
Position drain pan under drain cock (8).
(12)
Open drain cock (8) and allow coolant to drain.
(13)
Close drain cock (8).
|
