|
| |
TM 9-2320-364-20-4
6-23
b.
Fill.
(1)
Fill radiator (2) with coolant until full.
Refer to Table 2-4 and Para 2-9.
Ensure all personnel stay clear of
radiator while engine is running.
Air in radiator will be released
which may cause hot coolant to
spray out and cause injury or
death to personnel.
(2)
Start engine and run engine until normal
operation temperature of 180 degrees is
reached, (TM 9-2320-364-10).
(3)
Shut off engine, (TM 9-2320-364-10).
(4)
Check radiator coolant level in sight glass
and add coolant as required,
(TM 9-2320-364-10).
(5)
Install radiator cap (1) on radiator (2).
c.
Follow-On Maintenance.
Start engine, (TM 9-2320-364-10).
Allow engine to run for three minutes.
Shut OFF engine, (TM 9-2320-364-10).
Check for leaks, (TM 9-2320-364-10).
Install left fender rear skirt, (Para 17-34).
Install right fender rear skirt, (Para 17-33).
Install engine access panel, (Para 17-24).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
