|
| |
TM 9-2320-364-20-4
6-39
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and cothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Coat threads of coolant level sight glass (7)
with sealing compound.
(2)
Install coolant level glass (7) in radiator (2).
(3)
Install radiator cap (1) on radiator (2).
c.
Follow-On Maintenance:
Fill radiator, (Para 6-4).
Start engine, (TM 9-2320-364-10).
Allow engine to run for three minutes, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Check for coolant leaks, (TM 9-2320-364-10).
Check coolant level, (TM 9-2320-364-10).
Install right fender rear skirt, (Para 17-33).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
