| |
TM 9-2320-364-20-4
6-42
6-7. THERMOSTAT REPLACEMENT (CONT).
(3)
Remove screw (7), lockwasher (8) and
clip (9) from left thermostat housing (6).
Discard lockwasher.
(4)
Remove two screws (10) and
lockwashers (11) from left thermostat
housing (6). Discard lockwashers.
NOTE
It may be necessary to tap
thermostat housing with a soft
faced hammer to loosen from
engine block.
(5)
Remove left thermostat housing (6) and
gasket (12) from engine block (13). Discard
gasket.
(6)
Remove and discard thermostat (14) from
left thermostat housing (6).
(7)
Loosen two clamps (15) and move hose (16)
toward right thermostat housing (17) until
free.
(8)
Loosen two clamps (18) on hose (19) and
slide hose on top crossover tube (2).
(9)
Loosen clamp (20) on hump hose (21) and
remove hump hose and clamp from right
thermostat housing (17).
|