|
| |
TM 9-2320-364-20-4
7-29
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Apply sealing compound to threads of two
screws (8).
(2)
Install regulator (7) on alternator (2) with
two washers (10), lockwashers (9), and
screws (8).
(3)
Install wire 1020B (5), washer (4) and
locknut (3) on terminal (6) of regulator (7).
Tighten locknut to 25 lb-in (3 N.m).
(4)
Apply electrical sealant to terminal (6).
(5)
Connect regulator receptacle connector (1)
to alternator (2).
c.
Follow-On Maintenance:
Install cab engine access panel, (Para 17-24).
Connect batteries, (Para 7-87).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
3
2
5
4
7
8
9
10
1
6
|
