|
| |
TM 9-2320-364-20-4
7-39
Adhesive causes immediate
bonding on contact with eyes,
skin, or clothing and also gives
off harmful vapors. Wear
protective goggles and use in
well-ventilated area. If adhesive
gets in eyes, try to keep eyes
open; flush eyes with water for
15 minutes and get immediate
medical attention.
(23)
Apply electrical sealant to 12 volt battery
stud (16), 24 volt alternator stud (12),
ground stud (26), IGN stud (21), 24 volt
battery stud (9), stud (53), stud (51), stud
(47) and stud (43).
(24)
Install splash guard (4), four washers (3),
lockwashers (2) and screws (1) on electric
bracket (5).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Adjust DUVAC control, (Para 7-10).
Install left side noise panel, (Para 17-28).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
26
43
51
47
53
16
9
21
12
|
