|
| |
TM 9-2320-364-20-4
7-48
7-11. POLARITY PROTECTION CONTROL REPLACEMENT (200 AMP) (CONT).
(7)
Install capacitor (55) on studs (53) and (47).
(8)
Install jumper diode wire (54) with negative
terminal on stud (51) and positive terminal
on stud (53).
(9)
Install two wires 1435 (52), lockwasher (49)
and nut (48) on stud (53) of 24 volt solenoid
switch (44).
(10)
Install wire 1021A (50), lockwasher (49)
and nut (48) on stud (51) of 24 volt
solenoid switch (44).
(11)
Install wire 1045 (45), capacitor wire (46),
lockwasher (41) and nut (40) on stud (47)
of 24 volt solenoid switch (44).
(12)
Install wire 1055 (42), lockwasher (41) and
nut (40) on stud (43) of 24 volt solenoid
switch (44).
|
