|
| |
TM 9-2320-364-20-4
7-72
7-15. INSTRUMENT PANEL SWITCH WIRING HARNESS REPLACEMENT (CONT).
(4)
Disconnect wire 1276 (6) from thumbwheel rheostat (7).
(5)
Remove nut (8), lockwasher (9) and two wires 1052 (10) from thumbwheel rheostat (7). Discard
lockwasher.
(6)
Remove switch wiring harness (11) from instrument panel (12).
b.
Installation.
NOTE
Install cable ties as required.
All 10 rocker switch connectors are installed in the same way.
All 10 light bulb socket connectors are installed in the same way.
(1)
Position switch wiring harness (11) in instrument panel (12).
(2)
Install two wires 1052 (10) on thumbwheel rheostat (7) with lockwasher (9) and nut (8).
(3)
Connect wire 1276 (6) on thumbwheel rheostat (7).
(4)
Connect MC53 connector (5).
|
