|
| |
TM 9-2320-364-20-4
7-108
7-32. ENGINE SWITCH REPLACEMENT (CONT).
(5)
Remove screw (6), washer (7) and wire
1021 (12) from starter post (13) on engine
switch (4).
(6)
Remove screw (6), washer (7) and wire
1020 (14) from ignition post (15) on engine
switch (4).
(7)
Remove engine switch (4) from truck (16).
b.
Installation.
If replacing engine switch,
remove and discard screw and
washer from ground terminal.
Failure to comply may result in
damage to equipment.
(1)
Position engine switch (4) in truck (16).
(2)
Install wire 1020 (14), washer (7) and
screw (6) on ignition post (15) on engine
switch (4).
(3)
Install wire 1021 (12), washer (7) and
screw (6) on starter post (13) on engine
switch (4).
(4)
Install wire 1640 (10), washer (7) and
screw (6) on ACC post (11) on engine
switch (4).
(5)
Install wire 1431 (8), washer (7) and
screw (6) on BAT post (9) on engine switch
(4).
(6)
Install engine switch (4) in instrument panel
(5).
(7)
Install nut (3), lever (2) and screw (1) on
engine switch (4).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Start engine, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
