|
| |
TM 9-2320-364-20-4
7-114
7-35. TURN SIGNAL SWITCH/HAZARD SWITCH REPLACEMENT (CONT).
(2)
Install mounting screws (11) and (12) in turn
signal switch (10) and emergency hazard
switch (13).
(3)
Install turn signal switch arm (9) in turn
signal switch (10).
(4)
Install turn signal wiring harness sleeve (18)
on turn signal wiring harness (2).
(5)
Install tape (8) on turn signal wiring
harness (2).
NOTE
Strip wire insulation to allow 1/4
in. of wire to be exposed.
(6)
Install dust boot (17) and contact (16) on
turn signal wiring harness (2).
(7)
Install six dust boots (15) and contact (14)
on turn signal wiring harness (2).
(8)
Install dust boot (17) and contact (16) in
turn signal connector MC92 (5).
(9)
Install six dust boots (15) and contact (14) in
turn signal connector MC7 (3).
|
