|
| |
TM 9-2320-364-20-4
7-123
NOTE
Lockwashers may or may not
have been used in Step (6).
There may only be one nut
used in Step (6).
(6)
Remove nut (19), lockwasher (20), two
clamp halves (16), lockwasher (21) and
nut (22) from proximity switch (17).
b.
Installation.
NOTE
If lockwashers are not used
in Step (1), serrated side of
nuts face clamp.
There may be only one nut
used in Step (1).
(1)
Install nut (22), lockwasher (21), two clamp
halves (16), lockwasher (20) and nut (19) on
proximity switch (17).
(2)
Position proximity switch (17), with two clamp halves (16) as an assembly, on middle frame (18) with
plate (15), two lockwashers (14) and screws (13).
|
