|
| |
TM 9-2320-364-20-4
7-125
(1)
Connect batteries, (Para 7-87).
(2)
Fully extend hook arm (1) using manual mode only.
(3)
Adjust clearance between proximity switch (2) and hook arm (1) using two screws (3). Clearance should
be 0.11 in. 0.01 in. (2.79 mm 0.25 mm).
(4)
Tighten two screws (3) on proximity switch (2).
d.
Follow-On Maintenance:
LHS in transit position, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
(2.79MM .25 MM)
.11 IN. .01 IN.
|
