|
| |
TM 9-2320-364-20-4
7-131
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (Para 7-87)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
7-40. LOAD HANDLING SYSTEM (LHS) CONTROL ASSEMBLY (CAB) REPLACEMENT.
a.
Removal.
NOTE
Do not remove eight acorn nuts on control cover. Control is not repairable and should not be
disassembled.
(1)
Remove eight screws (1) and handle (2) from control assembly (3).
(2)
Remove control assembly (3) from console (4).
(3)
Remove two connectors (5) from control assembly (3).
b.
Installation.
(1)
Install two connectors (5) on control assembly (3).
(2)
Install control (3) and handle (2) in console (4) with eight screws (1).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Start engine and check operation of LHS, (TM 9-2320-364-10).
Shut OFF ENGINE, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
