|
| |
TM 9-2320-364-20-4
7-135
b.
Installation.
NOTE
Both switches are installed onto
cover the same way.
(1)
Install seal (21) and button (19) in cover (6)
with nut (20).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(2)
Apply adhesive to back of switch (11).
(3)
Line up tabs in switch (11) and position
switch (11) on button (19).
Pressing down on, or rotating tab
more than required to lock tab
could break tab and/or switch.
NOTE
Tab will only move a short
distance.
(4)
Press down and rotate lock tab (18)
counterclockwise on switch (11).
|
