|
| |
TM 9-2320-364-20-4
7-141
(12)
Remove harness wires 1461 (26),
1435 (27), 1469 (28), 1469 (29), 1466 (30),
1470 (31) and 1475 (32) from terminal
strip (7).
(13)
Remove two locknuts (33), screws (34) and
terminal strip (7) from junction box (3).
Discard locknuts.
(14)
Remove four locknuts (35) and
bulkheads (36) from junction box (3).
Discard locknuts.
(15)
Remove four locknuts (37), screws (38),
connector (23) and harness (39) from
junction box (3). Discard locknuts.
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, give
off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Wire numbers on harnesses
match numbers on terminal strip.
(1)
Apply adhesive to back plate of
connector (23).
|
