|
| |
TM 9-2320-364-20-4
7-151
c.
Adjustment.
(1)
Connect batteries, (Para 7-87).
(2)
Start engine and lower outriggers until weight
is off suspension, (TM 9-2320-364-10).
(3)
Shut OFF engine, (TM 9-2320-364-10).
(4)
Adjust top jam nut (6) and bottom jam
nut (7) until proximity switch (8) contacts
outriggers cylinder (38).
NOTE
Proper adjustment for
proximity switch is with
switch backed out two
complete turns from cylinder
contact point.
Adjusting jam nuts will result
in movement of switch.
(5)
Tighten top jam nut (6) two complete turns
to back proximity switch out two threads.
(6)
Tighten bottom jam nut (7).
(7)
Install grommet (9) on outrigger cover (5).
(8)
Install proximity switch cover (4) on
outrigger cover (5) with two washers (3),
lockwashers (2) and screws (1).
(9)
Repeat Steps (4) through (8) for left side
proximity switch.
d.
Follow-On Maintenance:
Check crane operation, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
