|
| |
TM 9-2320-364-20-4
2-3005
(1) Set CTIS rotary selector switch to
MUD, SAND AND SNOW
(TM 9-2320-364-10).
(2) Start engine and build up air pressure
to 125 4 psi (861 28 kPa).
(3) Check interaxle lockup air lines for
damage, crimps or leaks (Para 12-36
and schematic Fig 2-73).
(a) If damage, crimps or leaks are
present, turn OFF ENGINE
switch, and tighten loose
connections or replace air line
(Para 12-36 and schematic
Fig 2-73).
(b) If no damage, crimps or leaks are
present, turn OFF ENGINE switch
and go to Step 2 of this Fault.
VISUAL INSPECTION
Do not stand between wheels when engine is operating. Movement of vehicle can cause injury or death
to personnel.
|
