|
| |
TM 9-2320-364-20-4
7-184
7-52. FRONT MARKER LIGHT ASSEMBLY REPAIR (CONT).
d.
Assembly.
NOTE
There are two blackout
lights. Both blackout lights
are assembled the same way.
Install cable ties as required.
(1)
Install gasket (26), blackout marker light
assembly (22) and two screws (25) in
bracket (10).
Corrosion inhibitor contains
alkali. Do not get in eyes; wear
goggles/safety glasses when
using. Avoid contact with skin. In
case of contact, immediately
wash area with soap and water. If
eyes are contacted, flush eyes
with large amounts of water for
at least 15 minutes and get
immediate medical attention.
(2)
Apply anti-corrosion silicone compound
to inside of lamp socket (24).
(3)
Install blackout lamp (23) in blackout lamp
socket (24).
(4)
Install two screws (20) in lens cover (21).
(5)
Connect wire 1680 (18) to wire 490 (19).
|
