|
| |
TM 9-2320-364-20-4
7-188
7-53. REAR MARKER LIGHT ASSEMBLY REPAIR (CONT).
NOTE
There are seven red marker
lights. All red marker lights
are removed the same way.
Remove cable ties as
required.
Left and right side removed
the same way.
Loop clamp is removed by
first pulling out lock button
and then removing loop
clamp.
(2)
Remove loop clamp (2) and two wires 489
(3) from rear light bar assembly (4).
(3)
Disconnect wire 1012 (5) from wire 489 (3).
NOTE
Perform Steps (4) through (6)
for rear marker light with
lamp.
Perform Steps (7) through (9)
for rear light with LED.
(4)
Remove two screws (6) and lens cover (7)
from rear marker light assembly (8).
(5)
Remove rear marker lamp (9) from rear
marker lamp socket (10).
(6)
Remove two locknuts (11), wire 1435 (12),
two screws (13), rear marker light assembly
(8) and gasket (14) from rear marker light
bracket (15). Discard locknuts.
(7)
Remove two screws (16) and lens cover
(17) from rear marker light assembly (18).
(8)
Remove two locknuts (19), wire 1435 (20),
two screws (21), ground wire (22) rear
marker light assembly (18) and gasket (23)
from rear bracket (24). Discard locknuts.
(9)
Turn LED (25) counterclockwise 1/4 turn
and remove from rear marker light assembly
(18).
19
16
20
24
23
18
21
17
25
22
|
