|
| |
TM 9-2320-364-20-4
7-197
Corrosion inhibitor contains
alkali. Do not get in eyes; wear
goggles/safety glasses when
using. Avoid contact with skin. In
case of contact, immediately
wash area with soap and water. If
eyes are contacted, flush eyes
with large amounts of water for
at least 15 minutes and get
immediate medical attention.
(4)
Apply anti-corrosion silicone compound to
inside of socket (5).
(5)
Install lamp (4) in socket (5).
(6)
Install lens cover (2) and two screws (1) on
amber marker light assembly (3).
(7)
Position ground wire (20) through hole in
amber marker light assembly (13).
(8)
Install LED (18) in amber marker light
assembly (13) and turn 1/4 turn clockwise
(9)
Position gasket (19) on wire 489 (16) and
connect wire 489 (16) to wire 1012 (17).
(10)
Install amber marker light assembly (13),
ground wire (20) and four self-tapping
screws (14) on truck (15).
(11)
Install lens cover (12) and two screws (11)
on amber marker light assembly (13).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Check operation of amber marker lights, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
17
15
16
19
13
14
11
18
12
20
|
