|
| |
TM 9-2320-364-20-4
7-225
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Apply sealing compound on threads of
fitting (7).
(2)
Install fitting (7) on air inlet housing (8).
(3)
Install tee (5) on fitting (7).
(4)
Apply sealing compound on threads of
tee (5).
(5)
Install hose (6) on tee (5).
(6)
Apply sealing compound on threads of turbo
boost switch (4).
(7)
Install turbo boost switch (4) on tee (5).
(8)
Install wire 1955 (2) and wire 1957 (3) on
turbo boost pressure switch (4) with
screws (1).
c.
Follow-On Maintenance:
Close engine cover, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
