|
| |
TM 9-2320-364-20-4
7-227
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Apply sealing compound to threads of fuel
temperature sensor (2).
(2)
Install fuel temperature sensor (2) in tee (3).
(3)
Connect connector (1) in fuel temperature
sensor (2).
c.
Follow-On Maintenance:
Install Electronic Control Module (ECM), (DDEC II, Para 7-56 or DDEC III, Para 7-57).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
