|
| |
TM 9-2320-364-20-4
7-229
b.
Installation.
(1)
Install turbo boost sensor bracket (6) on
ECM bracket (10) with washer (9),
lockwasher (8) and screw (7). Tighten
screw (7) to 120 to 156 lb-in (13 to 17 N.m).
(2)
Install turbo boost sensor (3) on turbo boost
sensor bracket (6) with two screws (5).
(3)
Connect connector (4) and hose (2) to turbo
boost sensor (3).
(4)
Tighten clamp (1) on hose (2).
c.
Follow-On Maintenance:
Install Electronic Control Module (ECM), (DDEC II, Para 7-56 or DDEC III, Para 7-57).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
