|
| |
TM 9-2320-364-20-4
7-232
7-64. STE/ICE WATER TEMPERATURE SENSOR REPLACEMENT (CONT).
b.
Installation.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(1)
Apply sealing compound to threads of bushing reducer (8) or (10).
(2)
Install bushing reducer (8) or (10) in thermostat housing (11).
(3)
Apply sealing compound to threads of STE/ICE sensor (7) or (9).
NOTE
Perform Step (4) for DDEC II engines.
Perform Step (5) for DDEC III engines.
(4)
Install STE/ICE sensor (7) in bushing reducer (8).
(5)
Install STE/ICE sensor (9) in bushing reducer (10).
(6)
Connect MC71 connector (6).
DOOR
SHOWN
REMOVED
FOR CLARITY
10
9
11
8
7
6
|
