|
| |
TM 9-2320-364-20-4
7-245
(2)
Disconnect connector (6) from coolant
temperature sensor (7).
(3)
Remove coolant temperature sensor (7)
from fitting (8).
(4)
Remove fitting (8) from right thermostat
housing (9).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and
water.
(1)
Apply sealing compound to threads of
fitting (8) and coolant temperature sensor
(7).
(2)
Install fitting (8) in right thermostat housing
(9).
(3)
Install coolant temperature sensor (7) in
fitting (8).
(4)
Connect connector (6) in coolant
temperature sensor (7).
(5)
Install cab engine access panel (4) in cab (5)
with 22 washers (3), lockwashers (2) and
screws (1).
c.
Follow-On Maintenance:
Install fire extinguisher, (TM 9-2320-364-10).
Fill cooling system, (Para 6-4).
Connect batteries, (Para 7-87).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
9
8
6
7
|
