|
| |
TM 9-2320-364-20-4
7-259
Material/Parts
Sealing Compound (Item 72, Appendix C)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (Para 7-87)
Engine cover opened, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
7-75. AIR CLEANER PRESSURE TRANSDUCER REPLACEMENT.
a.
Removal.
NOTE
Transducer is located on air inlet
tube.
(1)
Disconnect MC67 connector (1).
(2)
Remove pressure transducer (2) from
reducer bushing (3).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Apply sealing compound to threads of
transducer (2).
(2)
Install pressure transducer (2) in reducer
bushing (3).
(3)
Connect MC67 connector (1).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Close engine cover, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
