| |
TM 9-2320-364-20-4
7-266
Material/Parts
Sealant, Electrical (Item 68, Appendix C)
Sealing Compound (Item 72, Appendix C)
Lockwasher (Item 194, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (Para 7-87)
Left front fender skirt removed, (Para 17-34)
Tools and Special Tools
Tool Kit, General Mechanics: Automotive
(Item 74, Appendix G)
7-79. ENGINE OIL PRESSURE SENDING UNIT REPLACEMENT.
a.
Removal.
(1)
Remove wire 1435 (1) from oil pressure
sending unit (2).
(2)
Remove nut (3), lockwasher (4), wire
1113 (5) and washer (6) from oil pressure
sending unit (2). Discard lockwasher.
(3)
Remove oil pressure sending unit (2) from
manifold (7).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Coat threads of oil pressure sending unit (2)
with sealing compound and install in
manifold (7).
(2)
Install washer (6) and wire 1113 (5) on oil
pressure sending unit (2) with
lockwasher (4) and nut (3).
(3)
Apply electrical sealant to terminal on oil
pressure sending unit (2).
(4)
Install wire 1435 (1) on oil pressure sending
unit (2).
|