|
| |
TM 9-2320-364-20-4
7-271
b.
Installation.
(1)
Install transmission oil temperature sending unit (6) in transmission (7).
(2)
Install washer (5), washer (4), wire 1449 (3), lockwasher (2) and nut (1) on transmission oil temperature
sending unit (6). Tighten nut to 20 lb-in (2 N.m).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(3)
Apply electrical sealant to terminal on transmission oil temperature sending unit (6).
c.
Follow-On Maintenance:
Install right side noise panel, (Para 17-26).
Connect batteries, (Para 7-87).
Install spare tire, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
