|
| |
TM 9-2320-364-20-4
7-310
Materials/Parts - Continued
Sealant, Electrical (Item 68, Appendix C)
Tags, Identification (Item 88, Appendix C)
Locknut (3) (Item 106, Appendix F)
Lockwasher (8) (Item 168, Appendix F)
Lockwasher (2) (Item 191, Appendix F)
Lockwasher (2) (Item 198, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Left side noise panel removed, (Para 17-28)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Socket Set, 3/8 in. (Item 62, Appendix G)
Wrench, Torque, 0 to 175 lb-ft [0 to 237 N.m]
(Item 95, Appendix G)
Wrench, Torque, (0 to 60 N.m)
(Item 98, Appendix G)
7-91. BATTERY BOX WIRING REPLACEMENT (200 AMP).
Materials/Parts
Compound, Corrosion Preventive
(Item 34, Appendix C)
Rags, Wiping (Item 67, Appendix C)
a.
Removal.
Battery acid (electrolyte) is extremely harmful. Always wear safety goggles and rubber
gloves, and do not smoke when performing maintenance on batteries. Injury will result if
acid contacts skin or eyes. Wear rubber apron to prevent clothing being damaged.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may result. Damage to equipment, injury or death
to personnel may occur.
NOTE
Tag and mark wires prior to removal.
(1)
Remove battery box cover (1) from battery box (2).
|
