|
| |
TM 9-2320-364-20-4
7-323
NOTE
If truck is not equipped with a battery disconnect switch, install wire 1275 in Step (24).
(22)
Position screw (20), washer (19), cable 1137 (8), cable 1275 (18), wire 1821 (17), wire 1813 (16), washer
(15), lockwasher (14) and nut (13) on negative terminal (21).
While applying torque to nut, hold screw with wrench or damage to battery may occur.
(23)
Tighten nut (13) to 12 to 16 lb-ft (16 to 22 N.m).
20
19
8
21
18
14
17
13
16
15
|
