|
| |
TM 9-2320-364-20-4
7-333
(3)
Remove nut (5), lockwasher (6), diode (8),
capacitor (10) and wire 1435 (11) from
magnetic switch (12). Discard lockwasher.
NOTE
Wire 1959 may or may not be
present in Step (4).
(4)
Remove nut (1), lockwasher (2),
capacitor (10), wire 1702 (13),
wire 1280 (14) and wire 1959 (15), from
magnetic switch terminal (16). Discard
lockwasher.
(5)
Remove screw (17) and wire 1435 (18)
from magnetic switch (19) and electronic
control box (20). Discard screw.
(6)
Remove screw (17) and magnetic switch
(19) from electronic control box (20).
Discard screw.
b.
Installation.
(1)
Install magnetic switch (19) and wire
1435 (18) with two screws (17) in magnetic
switch (19) and electronic control box (20).
NOTE
Wire 1959 may or may not be
present in Step (2).
(2)
Positiom wire 1959 (15), wire 1072 (13),
wire 1280 (14), capacitor (10), lockwasher
(2) and nut (1) in magnetic switch terminal
(16).
(3)
Tighten nut (1) to 30 to 35 lb-in (3 to 4 N.m).
5
6
10
11
12
8
|
