|
| |
TM 9-2320-364-20-4
7-370
Material/Parts
Cable Ties (Item 25, Appendix C)
Tags, Identification (Item 88, Appendix C)
Locknut (4) (Item 106, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (Para 7-87)
Tools and Special Tools
Tool Kit, Electric (Item 73, Appendix G)
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
7-104. 12-PIN ELECTRICAL CONNECTOR REPLACEMENT.
a.
Removal.
NOTE
Tag and mark wires prior to
removal.
Remove cable ties and loosen
cushion clips as required.
(1)
Remove four locknuts (1), screws (2),
spring cover (3), electrical connector
housing (4) and two spacers (5) from
mounting bracket (6). Discard locknuts.
(2)
Remove collar (7) and collar boot (8) from
electrical connector housing (4).
(3)
Remove electrical connector MC15 (9) from
electrical connector housing (4).
|
