|
| |
TM 9-2320-364-20-4
7-378
7-106. BATTERY DISCONNECT SWITCH BOX REPAIR (CONT).
b.
Installation.
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin. To avoid injury
or death, keep away from open
fire and use in well ventilated
area. If adhesives, solvent or
sealing compound gets on skin or
clothing, wash immediately with
soap and water.
(1)
Apply electrical sealant to four grommets
(22).
(2)
Install four grommets (22) in battery
disconnect switch box (2).
(3)
Pull wires 1281A (5), 1566 (10), 1281A (11)
and 1274 (12) through battery disconnect
switch box (2).
(4)
Install battery disconnect switch box (2) on
left fender (21) with four screws (20), two
mounting brackets (19) and four locknuts
(18).
(5)
Install four screws (17), isolator plate (16),
battery disconnect switch (9), washers (15),
lockwashers (14) and nuts (13).
(6)
Tighten nuts (13) to 15 lb-ft (20 N.m).
16
15
14
13
18
17
20
19
22
21
9
2
22
5
10
11
12
2
|
