|
| |
TM 9-2320-364-20-4
8-7
Materials/Parts
Cloth, Cleaning (Item 31, Appendix C)
Lubricating Oil (Item 50, Appendix C)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Left side noise panel removed, (Para 17-28)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Pan, Drain (Item 47, Appendix G)
Removal Tool, Oil Filter (Item 54, Appendix G)
8-4. TRANSMISSION OIL FILTER (EXTERNAL) REPLACEMENT.
a.
Removal.
Ensure transmission oil and filter are cool prior to removal. Failure to comply may result in
injury to personnel.
NOTE
Gasket may stay with filter or
adapter housing.
(1)
Position drain pan under oil filter (1).
(2)
Remove and discard oil filter (1) and
gasket (2) from adapter (3) by turning
counterclockwise.
b.
Installation.
(1)
Clean adapter (3) sealing surface with
cleaning cloth.
(2)
Fill oil filter (1) with oil and lightly coat
gasket (2) with oil.
(3)
Install filter (1) on adapter (3). Tighten
filter two-thirds turn after filter seal contacts
adapter.
c.
Follow-On Maintenance:
Check transmission oil level,
(Para 2-9, Lubrication Table 2-3).
Install left side noise panel, (Para 17-28).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
