|
| |
TM 9-2320-364-20-4
2-3029
(1) Check shock absorbers for leaks or
damage.
(a) If shock absorbers are leaking or
damaged, replace shock
absorbers (Para 16-2 or 16-3).
(b) If there are no leaks or damage,
perform Step (2) below.
(2) Check shock absorbers for proper
mounting and excessive bushing
wear.
(a) If shock absorbers are loose,
tighten to 170 lb-ft (230 N.m).
(b) If bushings are worn, replace
bushing (Para 16-2 or 16-3).
(c) If bushings and mounting are OK,
go to Step 3 of this Fault.
VISUAL INSPECTION
NOTE
Shock absorbers are installed on Axles No. 1
through No. 4. Axle No. 2 shown.
|
