|
| |
TM 9-2320-364-20-4
9-20
9-7. TRANSFER CASE HOSE REPLACEMENT (CONT).
(2)
Remove hose 2815 (1) from tee (3).
(3)
Remove tube (4) from tee (3) and elbow (5).
(4)
Remove hose 2815 (6) from adapter (7).
(5)
Remove hose 2815 (6) from adapter (8).
(6)
Remove adapter (8) from tee (3).
(7)
Remove hose 2762 (9) from elbows (10) and (11)
(8)
Remove hose 2831 (12) from adapter (13).
(9)
Remove two screws (14), nuts (15),
lockwashers (16) and cushion clips (17) from right
support assembly (18). Discard lockwashers.
(10)
Remove cushion clip (17) from
hose 2831 (12).
(11)
Remove hose 2831 (12) from elbow (19).
(12)
Remove hose 2762 (20) from elbow (21)
and (22).
b.
Installation.
NOTE
Install cable ties as required.
(1)
Install hose 2762 (20) on elbows (21) and (22).
(2)
Install hose 2831 (12) on elbow (19).
(3)
Install two cushion clips (17) on hose 2831 (12) and right support assembly (18) with two screws (14),
lockwashers (16) and nuts (15). Tighten screws to 96 lb-in (11 N.m).
|
