|
| |
TM 9-2320-364-20-4
9-22
Materials/Parts
Sealing Compound (Item 72, Appendix C)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
LHS fully extended, (TM 9-2320-364-10)
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
9-8. TRANSFER CASE BREATHER REPLACEMENT.
(1)
Remove breather (1) from street elbow (2).
(2)
Remove elbow (2) from front housing (3).
b.
Installation.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(1)
Coat threads of elbow (2) with sealing compound and install elbow (2) into rear housing (3).
(2)
Coat threads of breather (1) with sealing compound and install into elbow (2).
c.
Follow-On Maintenance:
Start engine, (TM 9-2320-364-10).
Return load handling system to transit position, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
