|
| |
TM 9-2320-364-20-4
11-16
11-7. AXLE NO. 3 LOCKING CYLINDER LINES AND FITTINGS REPLACEMENT
(CONT).
(11)
Install cushion clip (8) on clamp (9) with
lockwasher (7) and nut (6).
(12)
Tighten nut (6) until lockwasher (7) is
compressed.
(13)
Install preformed packing (5) and washer
(4) on fitting (2).
(14)
Install fitting (2) in locking cylinder (3).
(15)
Install air line 2421 (1) on fitting (2).
c.
Follow-On Maintenance:
Start engine, (TM 9-2320-364-10).
Build up air pressure to 125 psi (861 kPa).
Shut OFF engine, (TM 9-2320-364-10).
Check for air leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
